Sony AVD-S50ES Operating Instructions - Page 17
Step 1: Speaker System Hookup, Inserting Batteries into the Remote - subwoofer
View all Sony AVD-S50ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Inserting Batteries into the Remote You can control the receiver using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the receiver. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with an old one. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. • If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. Step 1: Speaker System Hookup You can enjoy surround sound by connecting 5 speakers (front L/R speakers, center speaker, rear L/R speakers) and active subwoofer to the receiver. If you do not connect 5 speakers and active subwoofer to the receiver, the receiver offers the means to optimize signal depending on the number of connected speakers. When you connect 2 speakers to the receiver, connect the speakers to the SPEAKERS FRONT L/R jacks. Notes • Be sure to match the speaker cord to the appropriate terminal: 3 to 3, # to #, L to L, and R to R jack. • Use the high performance speakers. • Use the same size and performance speakers for the front, center, and rear speakers. • To obtain the best possible surround sound, specify the speaker parameters (number, distance, level, etc.) on page 25. 17US