Sony AVD-S50ES Operating Instructions - Page 79
Specifications
View all Sony AVD-S50ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 millwatts torated output. Amplifier section Stereo mode 100 W + 100 W (6 ohms, 20 - 20,000 Hz, THD 0.7 %) Surround mode Front: 100 W + 100 W Center*: 100 W Rear*: 100 W + 100 W (6 ohms, 20 - 20,000 Hz, THD 0.7 %) * Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) Inputs (Digital) Outputs (Analog) Outputs (Digital) ANALOG IN: Sensitivity: 150 mV Impedance: 50 kilohms DIGITAL IN OPTICAL: Sensitivity: - DIGITAL IN COAXIAL: Sensitivity: 0.5 V Impedance: 75 ohms ANALOG OUT: Voltage: 2 V Impedance: 1 kilohms SUBWOOFER ANALOG OUT: Voltage: 3 V Impedance: 47 kilohms PHONES: Accepts low- and high-impedance headphones DIGITAL OUT OPTICAL Sensitivity: - Super Audio CD/DVD system Laser Semiconductor laser (Super Audio CD/DVD: λ = 650 nm) (CD: λ = 780 nm) Emission duration: continuous Signal format system NTSC Frequency response (at 2 CH STEREO mode) DVD (PCM): 2 Hz to 22 kHz (±1.0 dB) CD: 2 Hz to 20 kHz (±1.0 dB) Signal-to-noise ratio More than 80 dB (VIDEO 1 (AUDIO) connectors only) Harmonic distortion Less than 0.03 % Additional Information continued 79US