Sony AVD-S50ES Operating Instructions - Page 73
Additional Information
View all Sony AVD-S50ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
The left and right sounds are unbalanced or reversed. , Check that the speakers and components are connected correctly and securely. , Adjust the balance parameter in the BALANCE menu (pages 27, 71). Severe hum or noise is heard. , Check that the speakers and components are connected securely. , Check that the connecting cords are away from a transformer or motor, and at least 3 meters (10 feet) away from a TV set or fluorescent light. , Move your TV away from the audio components. , The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. , Clean the disc. The sound loses stereo effect when you play a VIDEO CD, or a CD. , Set "AUDIO" to "STEREO" in the Control Menu display (page 46). , Make sure you connect the receiver appropriately. The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track. , Make sure the sound field function is on (page 48). , Check the speaker connections and settings (pages 24, 69). , Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format. The sound comes from the center speaker only. , Depending on the disc, the sound may come from the center speaker only. No sound is heard from the center speaker. , Check the speaker connections and settings. , Make sure the sound field function is on (page 48). , Select a sound field containing the word "cinema" (page 48). No sound or only a very low-level sound is heard from the rear speakers. , Check the speaker connections and settings. , Make sure the sound field function is on (page 48). , Select a sound field containing the word "cinema" (page 48). Operation Radio stations cannot be tuned in. , Check that the antennas are connected securely. Adjust the antennas and connect an external antenna if necessary. , The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. , No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 29). , Press DISPLAY so that the frequency appears in the display. The remote does not function. , The controllable source on the remote is the satellite receiver. Press SAT on the remote (page 61). , There are obstacles between the remote and the receiver. , The distance between the remote and the receiver is too far. , The remote is not pointed at the remote sensor on the receiver. , The batteries in the remote are weak. continued 73US Additional Information