Sony AVD-S50ES Operating Instructions - Page 69
Settings for the Speakers
View all Sony AVD-S50ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Settings for the Speakers (SPEAKER SETUP) To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level. Select "SPEAKER SETUP" in the setup display. For details, see "Using the Setup Display" (page 64). The default settings are underlined. SPEAKER SETUP SIZE: DISTANCE: LEVEL: BALANCE: TEST TONE: To return to the default setting Select the item, then press CLEAR. xSIZE When you do not connect center or rear speakers, or move the rear speakers, set the parameters for FRONT, CENTER, REAR, and SUBWOOFER. The default settings are underlined. • FRONT - LARGE: Normally select this. - SMALL: Select this if the small speakers are used for the front speaker. • CENTER - LARGE: Normally select this. - SMALL: Select this if the small speaker is used for the center speaker. - NONE: Select this if no center speaker is used. • REAR - BEHIND [A] (LOW), BEHIND [A] (HIGH), SIDE [A] (LOW), SIDE [A] (HIGH), BEHIND [B] (LOW), BEHIND [B] (HIGH), SIDE [B] (LOW), SIDE [B] (HIGH): Specify the size, position, and height to implement the Digital Cinema Surround modes in the sound field (page 48) properly. For details, see "Specifying the rear speaker position and height" as below. - NONE: Select this if no rear speaker is used. • SUBWOOFER - YES: Select this if the subwoofer is used. - NONE: Select this if no subwoofer is used. Notes • When you select an item, the sound cuts off for a moment. • Depending on the settings, the subwoofer may output excessive sound. Settings and Adjustments Specifying the rear speaker position and height If you select anything other than "NONE" in "REAR," specify the size, position, and height of the rear speakers. When you use normal size speakers, select [A]. When you use small speakers, select [B]. The default setting is underlined. BEHIND [A] (LOW), BEHIND [B] (LOW) BEHIND [A] (HIGH), BEHIND[B] (HIGH) SIDE [A] (LOW), SIDE [B] (LOW) SIDE [A] (HIGH), SIDE [B] (HIGH) Select this if the rear speakers are located in section B and D. Select this if the rear speakers are located in section B and C. Select this if the rear speakers are located in section A and D. Select this if the rear speakers are located in section A and C. These parameters are not available when "REAR" is set to "NONE." continued 69US