Sony BDV-F7 Operating Instructions - Page 51
[Audio Settings
![]() |
UPC - 027242787056
View all Sony BDV-F7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Settings and Adjustments [Audio Settings] x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Off]: Outputs the primary audio only. Select this when outputting HD audio signals to an AV receiver. x [DTS Neo:6] Simulates multichannel surround sound from 2 channel sources according to the capability of the connected device, and outputs the sound via the HDMI OUT jack. [Cinema]: Outputs simulated multichannel sound from 2 channel sources using DTS Neo:6 Cinema mode. [Music]: Outputs simulated multichannel sound from 2 channel sources using DTS Neo:6 Music mode. [Off]: Outputs sound with its original number of channels. x [Audio DRC] You can compress the dynamic range of the sound track. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). [Off]: No compression of dynamic range. [On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. x [Attenuate - AUDIO] Distortion may occur when you listen to a component connected to the AUDIO (IN L/R) jacks. You can prevent distortion by reducing the input level on the unit. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. x [Audio Output] [Speaker]: Outputs sound from the system's speakers only. [Speaker + HDMI]: Outputs sound from the system's speakers and 2-channel linear PCM signals from the HDMI OUT jack. [HDMI]: Outputs sound from the HDMI OUT jack only. Sound format depends on the connected component. Note • Even if [HDMI] or [Speaker + HDMI] is selected, the sound of functions other than "BD/DVD" or "D.MEDIA" is output from the system's speakers, not from the HDMI OUT jack. • When you set [Audio Output] to [HDMI], the SOUND MODE and "SUR.SETTING" functions are disabled. • When the System Audio Control function (page 45) is activated, this setting may change automatically. x [Sound Effect] You can set the system's sound effects (SOUND MODE and "SUR.SETTING") to on/off. [On]: Enables all of the system's sound effects. The upper limit of sampling frequency is set to 48 kHz. [Off]: The sound effects are disabled. Select this when you do not want to set the upper limit of sampling frequency. x [Speaker Settings] To obtain the best possible surround sound, set the speakers. For details, see "Setting the Speakers" (page 46). 51US
![](/manual_guide/products/sony-bdvf7-operating-instructions-85997a1/51.png)