Sony BDV-N7100W Operating Instructions - Page 71
Picture, Sound, MODE, FOOTBALL or MUSIC EQ.
View all Sony BDV-N7100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Additional Information appears without any messages on the entire TV screen. t Contact your nearest Sony dealer or local authorized Sony service facility. "NOT.USE" appears in the top panel display when you press SOUND MODE, FOOTBALL or MUSIC EQ. t The setting for SOUND MODE, FOOTBALL and MUSIC EQ cannot be changed when the [Sound Effect] is set to other than [Sound Mode On]. Set [Sound Effect] in [Audio Settings] to [Sound Mode On] (page 62). Picture There is no picture or the picture is not output correctly. t Check the output method on your system (page 24). t Touch and hold N and VOL - on the main unit for more than 5 seconds to reset the video output resolution to the lowest resolution. t For BD-ROMs, check the [BD-ROM 24p Output] settings in [Screen Settings] (page 60). There is no picture when you make an HDMI cable connection. t The main unit is connected to an input device that is not HDCP (Highbandwidth Digital Content Protection) compliant ("HDMI" in the top panel does not light up) (page 24). 3D images from the HDMI (IN 1) or HDMI (IN 2) jack do not appear on the TV screen. t Depending on the TV or video equipment, 3D images may not appear. The dark area of the picture is too dark/the bright area is too bright or unnatural. t Set [Picture Quality Mode] to [Auto] (default) (page 44). Picture noise appears. t Clean the disc. t If the picture output from your system goes through your VCR to get to your TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your main unit directly to your TV, try connecting your main unit to the other input jacks. An image is not displayed on the entire TV screen. t Check the setting of [TV Type] in [Screen Settings] (page 60). t The aspect ratio on the disc is fixed. Color irregularity occurs on the TV screen. t If the speakers are used with a CRTbased TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set. t If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. t Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers. Sound There is no sound. t The speaker cords are not connected securely. t Check the speaker settings (page 51). 71US