Sony BDV-N7100W Operating Instructions - Page 75
BRAVIA Sync, Control for HDMI], Network connection, Wireless LAN, connection
View all Sony BDV-N7100W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Additional Information "BRAVIA" Sync ([Control for HDMI]) The [Control for HDMI] function does not work ("BRAVIA" Sync). t Check that [Control for HDMI] is set to [On] (page 64). t If you change the HDMI connection, turn the system off and on again. t If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 64). t Check the following and refer to the operating instructions supplied with the equipment. • The connected equipment is compatible with the [Control for HDMI] function. • The connected equipment's setting for the [Control for HDMI] function is correct. Network connection The system cannot connect to the network. t Check the network connection (page 27) and the network settings (page 65). Wireless LAN connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. t The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. t Check if the wireless LAN router is on. t Check the network connection (page 27) and the network settings (page 65). t Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other. t Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt communication. Move the main unit away from such devices, or turn off such devices. t The wireless LAN connection may be unstable depending on the usage environment, especially while using the Bluetooth function of the system. In this case, adjust the usage environment. The wireless router you want is not shown in the wireless network list. t Press RETURN to return to the previous screen, and try [Wireless Setup(built-in)] again. If the wireless router you want is still not detected, select [Add a new address.] from the network list, then select [Manual Registration] to input a network name (SSID) manually. 75US