Sony CDP-C79ES Operating Instructions - Page 16

• ,V.`714 • • Z•• sY.:•st;-,*2'44:'::. ii ,t.;1 ;:/ligeat'%•ZI-trei.1";2 - ,•• . . .- . Convenient Features for Tape Recording The following functions are convenient for editing your own tapes. Time Fade and Fade in/Fade out cannot be operated when the DIGITAL (optical) OUT is used for connections. Fading in/Fading out You can have the play fade in and fade out between 2-10 seconds. When no time is specified, the play will fade in and fade out for 5 seconds. To set the fade time 1 Press III 2 Press FADER. "FADE 5 SEC" will appear in the display window. The actual fade time "5" will be flashing. 3 Press N/► to select fade time between 2-10 seconds. 4 Press FADER. To end the play fading out Press FADER when you want to start fading out. P:" 1 blinks in the window, and play fades out and unit enters the pause mode. To restart the play fading in Press FADER in the.pause mode. r""q blinks in the window, and play fades in. Fading out at the a desired time - Time Fade You can have the play fade out at the end by designating the play duration. Once time fade is set, it functions twice for editing both sides of a tape. You can change discs without canceling this function. The fade time is preset to 5 seconds, but you can change it between 2-10 seconds. To set time fade 1 Press EDIT/TIME FADE twice during stop. IT.;°"E1is displayed in the window. 2 Set the desired play duration, using numeric buttons. e.g. To set to 27 minutes, press MIDEM You need not press buttons for seconds, unless required. You can designate the tape length easily with the IN/10N buttons. Each time you press a button, the time changes in the following way. Press I44 Press IISH • CC-90 45.- . - C-46 23.-- C-74 37.-- -C-60 30. -C-54 27.-- -) • Notes The desired play duration can be set from 10 seconds up to 59 minutes 59 seconds. 3 Press EDIT/TIME FADE. 4 To start play, press Pi.. After the designated time, play fades out and pauses. Tape side B lights up. Press II or low to resume playing for the other side of the tape. If you press FADER, fade in will start. When the play fades out for the second time, the unit pauses and the time fade function is canceled. When playback of a disc ended before the designated playing time The time fade function will remain effective even for a new disc(s) added for the remaining playing time originally designated, and the fade out starts in accordance with the initially set fade time. To cancel time fade Time fade will be canceled when - EDIT/TIME FADE is pressed once again. - 4140/104- (manual search) is pressed during play. To display the time remaining until the time set Press TIME/MEMO twice. If the PEAK SEARCH is pressed after setting time fade, time fade is released but peak search is kept active. 16