Sony CDP-C79ES Operating Instructions - Page 17
Locating, Loudest, Portion, Search
![]() |
View all Sony CDP-C79ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Locating the Loudest Portion of the Disc - Peak Search The CD player can search a disc from the beginning to the end and determine the loudest portion (peak level) of the disc, and then play that portion repeatedly. This function will make it easier for you to adjust to the optimum level when recording on tape. This function operates in all play modes as follows: Play mode Continuous and shuffle modes Program mode Bank mode Operation Searches all selections of the disc which is clamped currently Searches all programmed selections Searches all selections stored in the program bank Unless you are using the program mode, the unit will scan all discs that are clamped, even in the ALL DISCS mode. To activate the peak search Press PEAK SEARCH during the stop mode. "PEAK" blinks in the display and the all selection of the disc or program will be searched automatically. After finishing the search, the loudest portion is played repeatedly for 4 seconds and "- PEAK -" appears. Note To go to another disc press DISC SKIP during stop. To stop the peak search Press Press II to pause at the first selection. LI To start play immediately Press ►. The play starts from the beginning of the disc. Note on peak search function The unit determines the loudest portion (peak level) of a disc by searching it at fixed intervals. As a result, the portion searched may differ from the actual peak level. In addition, this function may determine different portions as the peak level for the same disc. However, the difference between the portion searched and the actual peak level is insignificant and will not present any problem in adjusting the recording level.
![](/manual_guide/products/sony-cdpc79es-operating-instructions-ea31082/17.png)