Sony CDP-C801ES Operating Instructions - Page 26

.•..C•O.N•T.IN.UE...... Sri 0 1=1116111111. OW • N A 1) PRESS CAMS3 OR [1-103 2) PRESS CEOITJ FOR SICE-A 3) ACCI TRACK BY E1-203 OR MISC. EXIP3 4) SPACE LEFT 1 .22 PRESS CEDIT3 TO FINI9-1 5) - FINISH - Designating the Total Playing Time To stop play Press11. You can play Me same program repeatedly as long as you do not cancel lime edit or erase Me program. To cancel time edit Press CONTINUE to return to continuous play mode. The program will be erased. To erase the entire program PressII during stop. Press■twice when 'EDIT appears in the display during stop. The program is also erased when you turn off the player or press a. To check your program See page 21. If your disc has more than 20 selections Selections over number 20 cannot be programmed with the time edit function. You cannot edit selections in the following USW • If you have programmed up to 32 steps 0.e. selections plus pauses). • If you have programmed selections whose playing time exceeds one hour. To designate a different time for each side Folow steps 1 to 4 on pages 46.48. and press U. Then repeat steps 2 and 4. Do not follow step 5. Edit NavIgatIon Display 1) Press foe/NI or one of the numeric buttons • lib to set Me recording time. 2) Press EDIT/TIME FADE to edit Side A or B. 3) Either add by using Me numeric buttons -la or change the disc by pressing DISC SKIP. This message means that all the selections are programmed and more can be programmed (Link edit). 4) 12r remains but no selection from the disc can be accommodated. Press the EDITMME FADE to end. This message means you can assign the selection from another disc for more than 1 minute after the selections for side B are programmed. Place another disc the unit search the selection within the allotted time. HIM selection is on the disc. Me selection number appears on the display with the link edit function. 5) Editing is done. 26