Sony CDX-M800 Service Manual - Page 16
Motor Block, Alignment Between Arm (a-l) Assy And Arm (b-l) Assy, Ptt 2.6x6, Switch Board, Sw900
View all Sony CDX-M800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CDX-M800 3-3. MOTOR BLOCK 1 Turn the cam (L) and position the cam so that part A does not touch the SW board SW900. 4 PTT 2.6x6 2 motor block 3 PTT 2.6x6 SWITCH board 5 PTT 2.6x6 SW900 cam (L) 3-4. ALIGNMENT BETWEEN ARM (A-L) ASSY AND ARM (B-L) ASSY 1 Input 9V DC to the motor terminal until the cam (L) stops rotating. Take care to avoid overload of the motor. 2 Verify that the arm (A-L) assy and arm (B-L) assy are positioned as shown below (full open). arm (B-L) assy A motor +B DC 9V GND arm (A-L) assy 16
16
CDX-M800
3-3. MOTOR BLOCK
3-4. ALIGNMENT BETWEEN ARM (A-L) ASSY
AND ARM (B-L) ASSY
1
Turn the cam (L) and position the cam so that part
A
does not touch the SW board SW900.
1
Input 9V DC to the motor terminal until the cam (L)
stops rotating.
Take care to avoid overload of the motor.
2
Verify that the arm (A-L) assy and arm (B-L) assy
are positioned as shown below (full open).
3
PTT 2.6x6
4
PTT 2.6x6
5
PTT 2.6x6
2
motor block
SWITCH board
SW900
cam (L)
A
motor
GND
arm (B-L) assy
arm (A-L) assy
DC 9V
+B