Sony DCR-DVD910 Operating Guide - Page 125
Quick Reference, The Active Interface Shoe has a safety
UPC - 689466092851
View all Sony DCR-DVD910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
A Lens (Carl Zeiss Lens) (7) B Flash (76) C Infrared port/Remote sensor Point the Remote Commander (p. 126) towards the remote sensor to operate your camcorder. D Active Interface Shoe The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. Refer to the operating instructions supplied with your accessory for details. The Active Interface Shoe has a safety device for fixing the installed accessory securely. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. • When you are recording movies with an external flash (optional) connected to the accessory shoe, turn off the power of the external flash to prevent charging noise being recorded. • You cannot use an external flash (optional) and the built-in flash at the same time. • When an external microphone (optional) is connected, it takes precedence over the built-in microphone (p. 36). • Slide the shoe cover after pulling out the viewfinder. E Viewfinder lens adjustment lever (25) F (VIEW IMAGES) button (32, 40) G EASY button (31) H . (BACK LIGHT) button (38) I Tripod receptacle Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.)) to the tripod receptacle using a tripod screw. Continued , 125 Quick Reference