Sony FWD-50PX2 User Manual - Page 48

Specifications Specifications Video processing Preset signal See page 24 (GB). Sampling rate 13.5 MHz to 140 MHz Panel system AC-type Plasma Display Panel Display resolution 1366 dots (horizontal) × 768 lines (vertical) Pixel pitch 0.81 (horizontal) × 0.81 (vertical) mm (1⁄16 × 1⁄16 inches) Picture size 1106 (horizontal) × 622 (vertical) mm (43 5⁄8 × 24 1⁄2 inches) Panel size 50-inch (diagonal 1270 mm) Inputs and Outputs INPUT1 DVI AUDIO DVI (DVI Specification Rev. 1.0 compliant) Stereo minijack (×1) 500 mVrms, high impedance INPUT2 RGB/COMPONENT D-sub 15-pin (female) (×1) (See "Pin assignment" on page 49 (GB).) AUDIO Stereo minijack (×1) 500 mVrms, high impedance CONTROL S IN/OUT Minijack (×2) AUDIO OUT RCA pin jack (×2) 500 mVrms, high impedance REMOTE (RS-232C) D-sub 9-pin (×1) SPEAKER 7 W + 7 W (6 ohms), direct unbalanced impedance: 6-16 ohms VIDEO/S VIDEO input/output adaptor BKM-FW10 VIDEO (NTSC, PAL, SECAM, NTSC4.43, PAL60, PAL-M, PAL-N) VIDEO IN BNC (×1) Composite video, 1 Vp-p ±2 dB sync negative, 75 ohms (automatic termination) VIDEO OUT BNC (×1) Loop-through S VIDEO IN Mini DIN 4-pin (×1) Y (luminance): 1 Vp-p ±2 dB sync negative, 75 ohms terminated C (chrominance): Burst 0.286 Vp-p ±2 dB (NTSC), 75 ohms terminated Burst 0.3 Vp-p ±2 dB (PAL), 75 ohms terminated S VIDEO OUT Mini DIN 4-pin (x1) Loop-through AUDIO IN RCA pin jack (×2) 500 mVrms, high impedance General Power requirements 100 V to 240 V AC, 50/60 Hz, 4.6 A (Maximum) Power consumption 440 W Operating conditions Temperature: 0 °C to +35 °C (32 °F to 95 °F) Humidity: 20% to 90% (no condensation) Atomospheric pressure: 800 to 1100 hPa Storing/transporting conditions Temperature: -10 °C to +40 °C (14 °F to 104 °F) Humidity: 20% to 90% (no condensation) Atomospheric pressure: 700 to 1100 hPa Dimensions 1256 × 753 × 112 mm (49 1⁄2 × 29 3⁄4 × 4 1⁄2 inches) (w/h/d, excluding projections) 48 (GB)