Sony FWD-50PX2 User Manual - Page 9

Connector Panel Location and Function of Parts and Controls 1 CONTROL S IN/OUT (Control S Signal Input/ Output) Connector (Minijack) You can control multiple devices with a single remote commander when connected to the CONTROL S connector of a video device or other display. Connect the CONTROL S OUT connector on this display to the CONTROL S IN connector of the other device, and connect the CONTROL S IN connector on this display to the CONTROL S OUT connector of the other device. 2 REMOTE (RS-232C) connector (D-sub 9-pin) This connector allows remote control of the display using the RS-232C protocol. For details, contact your authorized Sony dealers. 3 INPUT1 (DIGITAL RGB IN) connectors DVI : Connects to the digital RGB signal output of video devices. Supports HDCP copy protection. AUDIO (Stereo minijack) : Inputs an audio signal. Connects to the audio output of video devices. 4 INPUT2 (ANALOG RGB/COMPONENT IN) connectors RGB/COMPONENT (D-sub 15-pin) : Connects to the analog RGB signal or component (YUV) signal output of a piece of video equipment. AUDIO (Stereo minijack) : Inputs an audio signal. Connects to the audio output of a piece of video equipment. 5 AUDIO OUT L/R (RCA pin jack) Outputs an audio of the signal currently indicated on the screen. Outputs an audio signal corresponding to the Active Picture while in the P&P or PinP mode. 6 VIDEO connectors (BKM-FW10) S VIDEO IN (Mini DIN 4-pin) : Connects to the Y/ C signal output of a piece of video equipment. S VIDEO OUT (Mini DIN 4-pin) : Connects to the Y/C signal input of a piece of video equipment. VIDEO IN (BNC) : Connects to the video signal output of a piece of video equipment. VIDEO OUT (BNC) : Connects to the video signal input of a piece of video equipment. AUDIO IN L/R (RCA pin jack) : Inputs an audio signal. Connects to the audio output of a piece of video equipment. 9 (GB)