Sony FX52 Operating Instructions - Page 50
General, Optional accessories, DUE TO FAILURE OF THIS UNIT, EITHER - specifications
UPC - 027242684263
View all Sony FX52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative INPUT B Digital RGB: DVI-D (TM-DS) INPUT C Analog RGB/component: 5BNC (female) R/R-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B/B-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/ negative Horizontal sync input: 1-5 Vp-p high impedance, positive/ negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative MONITOR OUT HD D-sub 15-pin (female) R, G, B: Gain Unity: 75 ohms SYNC/HD,VD: 4 Vp-p (open), 1 Vp-p (75 ohms) *DIGITAL RGB signal is not output from MONITOR OUT terminal. TRIG Minijack Power on: 12 V DC, output impedance: 4.7 kilohms Power off: 0 V RS-232C D-sub 9 pin (female) CONTROL S IN/PLUG IN POWER Stereo minijack, 5 Vp-p, plug-in power 5 V DC NETWORK RJ-45: 10BASE-T/100BASE-TX General Dimensions Mass VPL-FX52: 480 × 169 × 502 mm (19 × 6 5/8 × 19 7/8 inches) (w/h/d) (with the projection parts) VPL-FX52L: 480 × 169 × 464 mm (19 × 6 5/8 ×18 3/8 inches) (w/h/d) (with the projection parts) VPL-FX52: Approx. 10.5 kg (23 lb 4 oz) VPL-FX52L: Approx. 9.1 kg (20 lb 1 oz) 50 Specifications Power requirements AC 100 to 240 V, 4.0 A - 1.6 A, 50/60 Hz Power consumption Max. 400 W in standby mode: 7 W (when network function is operating) Heat dissipation 1,365 BTU Operating temperature 0°C to 35°C (32°F to 95°F) Operating humidity 35% to 85% (no condensation) Storage temperature -20°C to 60°C (-4°F to 140°F) Storage humidity 10% to 90% Supplied accessories Remote Commander (1) Size AA (R6) batteries (2) Lens cap (1) (for VPL-FX52 with standard lens only) AC power cord (1) Air filter (for replacement) (1) Operating Instructions, Installation Manual for Dealers (CD-ROM) (1) Quick Reference Manual (1) Safety Regulations (1) Security Label (1) Warranty Card (1) Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. Optional accessories Projector Lamp LMP-F300 (for replacement) Projector Suspension Support PSS-620 Signal Interface Cable