Sony FX52 Operating Instructions - Page 54

Memory Preset signal No. 34 1,280 × 1,024 35 36 37 38 39 1,600 × 1,200 43 480/60P 44 575/50P 45 1,080/50I fH (kHz) fV (Hz) SXGA VESA 43 Hz 46.433 SGI-5 53.316 SXGA VESA 60 Hz 63.974 SXGA VESA 75 Hz 79.976 SXGA VESA 85 Hz 91.146 UXGA VESA 60 Hz 75.000 480/60P (Double frequency NTSC) 31.470 575/50P (Double frequency PAL) 31.250 1,080/50I 28.130 86.872 50.062 60.013 75.025 85.024 60.000 60.000 50.000 50.000 Sync H-pos, V-pos S on G H-pos, V-pos H-pos, V-pos H-pos, V-pos H-pos, V-pos S on G S on G SIZE 1,696 1,680 1,696 1,688 1,728 2,160 47 720/60P 720/60P 48 720/50P 720/50P 50 540/60P 540/60P 52 1,400 × 1,050 SXGA+ 45.000 37.500 33.750 63.981 60.000 50.000 60.000 60.020 H-neg, V-neg 1,688 Notes • When a signal other than the preset signals shown above is input, the picture may not appear properly. • Memory numbers 22 and 34 are interlace signals. • When an SXGA+ signal is input, the image may extend beyond the edge of the screen. In this event, input a signal in which the image is not surrounded by a black area, and then unplug and then plug back in the connecting cable, or else press the INPUT key and select the input signal again. 54 Specifications