Sony GXDL52H1 Operating Instructions - Page 70

Sound Mode, Sound Mode Adjust., True Color Control, Reset, Dynamic, Standard, Custom, Treble, Balance

Page 70 highlights

"True Color Control": You can adjust the details of hue and saturation for each of 4 colors : red, green, yellow, blue, and you can highlight specific colors in the image. Select the color which you want to adjust, and you can check and see which part of current image will be adjusted. Then you can adjust it using the matrix dialog. Notes • This option can be adjusted when "Picture Mode" is set to "TC Control". • In "PAP" mode, you cannot select this option. Even if you select this option in the single- picture screen, the setting of this option may not be applied in the "PAP" mode "Reset": Resets all settings of "Picture Mode Adjust." to default settings. Notes • "Phase" is not available when the input is Video or S Video and the color system of video signal is not NTSC. • "Dynamic Picture" is not available when "Picture Mode" is set to "Conference" or "TC Control." • You can make settings and adjustments for each "Picture Mode" but "Backlight," "Noise Reduction" and "CineMotion" settings are common for all "Picture Mode." Sound Mode You can adjust the sound output from the speakers SS-SPG01 (not supplied) with various "Sound Mode" settings. "Dynamic": Select to enhance treble and bass. "Standard": Flat setting. "Custom": Allows you to store preferred settings. Sound Mode Adjust. "Treble": Adjusts to increase or decrease higher-pitched sounds. "Bass": Adjusts to increase or decrease lower-pitched sounds. "Balance": Adjusts to emphasize left or right speaker balance. "Surround": Select the surround mode according to the type of picture. "Off": No surround output. "Hall": When desiring to give the stereo sound of movies or music programs a greater sense of presence. "Simul.": When desiring to give ordinary monaural programs or news telecasts an enhanced sense of presence using simulated stereo sound. "Reset": Resets all settings of "Sound Mode Adjust." to default settings. Tips • You can alter the "Picture Mode Adjust." settings ("Contrast", "Brightness", "Chroma ", etc.) for each "Picture Mode". • You can adjust the "Sound Mode Adjust." settings ("Treble" and "Bass") when the "Sound Mode" is set to "Custom". Notes • In the "PAP" mode, only "Picture/Sound" settings for the active picture can be adjusted. • If there is no signal currently being input, none of the options of the "Picture/Sound" setting can be selected. 22 GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310

22
GB
Tips
You can alter the “Picture Mode Adjust.” settings (“Contrast”, “Brightness”, “Chroma ”, etc.) for each “Picture Mode”.
You can adjust the “Sound Mode Adjust.” settings (“Treble” and “Bass”) when the “Sound Mode” is set to “Custom”.
In the “PAP” mode, only “Picture/Sound” settings for the active picture can be adjusted.
If there is no signal currently being input, none of the options of the “Picture/Sound” setting can be selected.
“True Color Control”:
You can adjust the details of hue and saturation for each of
4 colors : red, green, yellow, blue, and you can highlight specific colors in the image.
Select the color which you want to adjust, and you can check and see which part of
current image will be adjusted. Then you can adjust it using the matrix dialog.
This option can be adjusted when “Picture Mode” is set to “TC Control”.
In “PAP” mode, you cannot select this option. Even if you select this option in the single-
picture screen, the setting of this option may not be applied in the “PAP” mode
“Reset”:
Resets all settings of “Picture Mode Adjust.” to default settings.
“Phase” is not available when the input is Video or S Video and the color system of video
signal is not NTSC.
“Dynamic Picture” is not available when “Picture Mode” is set to “Conference” or “TC
Control.”
You can make settings and adjustments for each “Picture Mode” but “Backlight,” “Noise
Reduction” and “CineMotion” settings are common for all “Picture Mode.”
Sound Mode
You can adjust the sound output from the speakers SS-SPG01 (not supplied) with
various “Sound Mode” settings.
“Dynamic”:
Select to enhance treble and bass.
“Standard”:
Flat setting.
“Custom”:
Allows you to store preferred settings.
Sound Mode Adjust.
“Treble”:
Adjusts to increase or decrease higher-pitched sounds.
“Bass”:
Adjusts to increase or decrease lower-pitched sounds.
“Balance”:
Adjusts to emphasize left or right speaker balance.
“Surround”:
Select the surround mode according to the type of picture.
“Off”:
No surround output.
“Hall”:
When desiring to give the stereo sound of movies or music programs a
greater sense of presence.
“Simul.”:
When desiring to give ordinary monaural programs or news telecasts
an enhanced sense of presence using simulated stereo sound.
“Reset”:
Resets all settings of “Sound Mode Adjust.” to default settings.
Notes
Notes
Notes