Sony HCD-C990 Service Manual - Page 103
Sony HCD-C990 - Compact Audio And Video System Manual
![]() |
View all Sony HCD-C990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
HCD-C770/C990 Pin No. Pin Name I/O Description 43 DIP-RST O Reset signal output to the power amplifier "L": reset 44 DIP-OCP I Protect signal input from the power amplifier 45 ST-POWER O System power on/off control signal output "H": power on 46 HP-MUTE O Headphone muting on/off control signal output "L": muting on 47 AU-MUTE O Audio line muting on/off control signal output "L": muting on 48 AV-SEL2 O Audio/video selection signal output 49 PROG SW I SCAN SELECT switch input terminal "L": SELECTABLE, "H": INTERLACE 50 TU-ON O Power supply for tuner pack on/off control signal output 51 TUNED I Tuning detection signal input from the tuner unit "L": tuned 52 TUN-DI I Serial data input from the tuner unit 53 TUN-CE O Chip enable signal output to the tuner unit 54 TUN-DO O Serial data output to the tuner unit 55 TUN-CLK O Serial data transfer clock signal output to the tuner unit 56 FL-MUTE O Reset signal output to the fluorescent indicator tube driver "L": reset 57 FL-CLK O Serial data transfer clock signal output to the LED driver and fluorescent indicator tube driver 58 BVDD - Power supply terminal (+5V) (for bus interface) 59 BVSS - Ground terminal (for bus interface) 60 FL-DATA O Serial data output to the LED driver and fluorescent indicator tube driver 61 FL-CS O Chip select signal output to the fluorescent indicator tube driver "L" active 62 LED-CS O Standby signal output to the LED driver "L": standby 63 LED-CLR O Reset signal output to the LED driver "L": reset 64 HPSW I Connection detection signal input of the headphone jack "L": no connected, "H": headphone connected 65 DFIL RST2 O Reset signal output to the digital audio processor "L": reset 66 SP RELAY O Relay drive signal output terminal for the speaker protect Not used 67 PARA-DO2 I Serial data input from the changer controller (rotary encoder) 68 PARA-RST O Reset signal output to the changer controller (motor, switch) and changer controller (rotary encoder) "L": reset 69 PARA-LT1 O Serial data latch pulse signal output to the changer controller (motor, switch) 70 PARA-LT2 O Serial data latch pulse signal output terminal Not used 71 PARA-CLK O Serial data transfer clock signal output to the changer controller (motor, switch) 72 PARA-DATA O Serial data output to the changer controller (motor, switch) 73 PARA-DO1 I Serial data input terminal Not used 74 AVDD - Power supply terminal (+5V) (analog system) 75 AVSS - Ground terminal (analog system) 76 AVREF I Reference voltage (+5V) input terminal (analog system) 77 NO USE - Not used 78 OPT-SEN2 I Not used 79 OPT-SEN I Disc insert detection signal input from the disc sensor 80 AREA1 I Destination setting terminal 81 SEN2 I Disc loading detection signal input 82 to 84 KEY0 to KEY2 I Key input terminal (A/D input) 85 EN-A I Jog dial pulse input from the rotary encoder (A phase input) 86 EN-B I Jog dial pulse input from the rotary encoder (B phase input) 87 MODEL I Model setting terminal 88 RDS-DATA I RDS serial data input from the RDS decoder (Used for the AEP model) 89 DVD-POWER O DVD power on/off control signal output "H": power on 90 STOP I System stop signal input 103
![](/manual_guide/products/sony-hcdc990-service-manual-d43b35f/103.png)