Sony HCD-C990 Service Manual - Page 20
Install, Gear Mode 2, Gear Mode
View all Sony HCD-C990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
HCD-C770/C990 Ver 1.5 4-3. HOW TO INSTALL THE GEAR (MODE 2) 1 Align the mark on the rotary encoder (S701) with the projection of the assy. 2 Check that the cam (BU U/D) can not be rotated in the direction of arrow. 3 Install the gear (mode 2). rotary encoder (S701) gear (mode 2) cam (BU U/D) mark projection - bottom view • front - chassis 4-4. HOW TO INSTALL THE GEAR (MODE CAM) 1 Slide the shaft in the direction of arrow. 2 Align mark A on the gear (mode cam) with mark B on the slider (mode cam) assy, then install the gear (mode cam). 3 Check that mark C on the gear (mode cam) is in alignment with mark D on the cam (gear). shaft mark A gear (mode cam) mark D cam (gear) slider (mode cam) assy mark B mark C - bottom view • front - 20
20
HCD-C770/C990
mark
B
slider (mode cam) assy
shaft
mark
A
mark
D
gear (mode cam)
cam (gear)
mark
C
1
Slide the shaft in the direction of arrow.
2
Align mark
A
on the gear (mode cam) with mark
B
on the slider (mode cam) assy,
then install the gear (mode cam).
3
Check that mark
C
on the gear (mode cam) is in alignment with mark
D
on the cam (gear).
– bottom view • front –
4-3.
HOW
TO
INSTALL
THE
GEAR (MODE 2)
4-4.
HOW
TO
INSTALL
THE
GEAR (MODE
CAM)
– bottom view • front –
gear
(mode 2)
rotary encoder
(S701)
cam (BU U/D)
mark
projection
chassis
1
Align the mark on the rotary encoder (S701) with the projection of
the assy.
2
Check that the cam (BU U/D) can not be rotated in the direction of arrow.
3
Install the gear (mode 2).
Ver 1.5