Sony HCD-C990 Service Manual - Page 91
Sony HCD-C990 - Compact Audio And Video System Manual
View all Sony HCD-C990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
HCD-C770/C990 Pin No. 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 Pin Name AVDD0 ASYO ASYI RFAC AVSS1 CLTV FILO FILI PCO AVDD1 BIAS VCTL V16M VPCO DVDD2 ASYE MD2 DOUT LRCK PCMD BCLK EMPH 69 XTSL 70 DVSS2 71 XTAI 72 XTAO 73 SOUT 74 SOCK 75 XOLT 76 SQSO 77 SQCK 78 SCSY 79 SBSO 80 EXCK I/O Description - Power supply terminal (+3.3V) (analog system) O EFM full-swing output terminal I Asymmetry comparator voltage input terminal I EFM signal input from the DVD/CD RF amplifier - Ground terminal (analog system) I Internal VCO control voltage input terminal O Filter output for master PLL I Filter input for master PLL O Charge pump output for master PLL - Power supply terminal (+3.3V) (analog system) I Asymmetry circuit constant current input terminal I VCO control voltage input terminal for the wideband EFM PLL Not used O VCO oscillation output terminal for the wideband EFM PLL Not used O Charge pump output terminal for the wideband EFM PLL Not used - Power supply terminal (+3.3V) (digital system) I Asymmetry circuit on/off control signal input terminal "L": off, "H": on Not used I Digital out on/off control signal input from the mechanism controller "L": digital out off, "H": digital out on O Digital audio signal output to the digital audio interface IC O L/R sampling clock signal (44.1 kHz) output to the DVD decoder O Serial data output to the DVD decoder O Bit clock signal (2.8224 MHz) output to the DVD decoder O "L" is output when playback disc is emphasis off "H" is output when playback disc is emphasis on Not used I Input terminal for the system clock frequency setting "L": 16.9344 MHz, "H": 33.8688MHz Fixed at "H" in this set - Ground terminal (digital system) I System clock input terminal (33.8688 MHz) O System clock output terminal (33.8688 MHz) Not used O Serial data output terminal Not used O Serial data reading clock signal output terminal Not used O Serial data latch pulse signal output terminal Not used O Subcode Q data output to the mechanism controller I Subcode Q data reading clock signal input from the mechanism controller I Input terminal for resynchronism of guard subcode sync (S0+S1) Not used O Subcode serial data output to the DVD decoder I Subcode serial data reading clock signal input to the DVD decoder 91