Sony HCD-C990 Service Manual - Page 19
Hcd-c770/c990, Assembly
![]() |
View all Sony HCD-C990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SECTION 4 ASSEMBLY • This set can be assembled in the order shown below. 4-1. HOW TO INSTALL THE CAM (EJECT LOCK) 1 Rotate the cam (BU U/D) fully in the direction of arrow. 2 Engage the gear (eject lock) and the gear of the cam (eject lock) aligning the mark with the center of the gear (eject lock). cam (BU U/D) mark HCD-C770/C990 Ver 1.5 gear (eject lock) cam (eject lock) - bottom view • front - 4-2. HOW TO INSTALL THE CAM (GEAR) 1 Check that the cam (BU U/D) can not be rotated in the direction of arrow. 2 Align the mark on the cam (gear) with the boss as shown in the figure and install the cam (gear). cam (gear) cam (BU U/D) boss mark - bottom view • front - 19
![](/manual_guide/products/sony-hcdc990-service-manual-d43b35f/19.png)
19
HCD-C770/C990
• This set can be assembled in the order shown below.
4-1.
HOW
TO
INSTALL
THE
CAM (EJECT LOCK)
SECTION
4
ASSEMBLY
mark
cam (BU U/D)
cam (eject lock)
– bottom view • front –
gear (eject lock)
1
Rotate the cam (BU U/D) fully in the direction of arrow.
2
Engage the gear (eject lock) and the gear of the cam (eject lock)
aligning the mark with the center of the gear (eject lock).
4-2.
HOW
TO
INSTALL
THE
CAM (GEAR)
boss
cam (gear)
mark
cam (BU U/D)
– bottom view • front –
1
Check that the cam (BU U/D) can not be rotated in the direction of arrow.
2
Align the mark on the cam (gear) with the boss as shown in the figure
and install the cam (gear).
Ver 1.5