Sony HDRC-4000 Operation Guide - Page 20

Menu Description CONFIGURATION Use to set basic settings of the unit (excludes image quality settings). SETUP Use to set the image quality when converting video on the unit. 1. HDRtHDR Configure settings for converting from HDR to HDR. 2. HDRtSDR Configure settings for converting from HDR to SDR. 3. SDRtHDR Configure settings for converting from SDR to HDR. 4. SDRtSDR Configure settings for converting from SDR to SDR. 5. 4KtHD Configure settings for down-converting from 4K to HD. 6. HDt4K Configure settings for up-converting from HD to 4K. ADDITIONAL PAINT Use to set additional image quality settings of the unit. If ADDITIONAL PAINT is OFF, the image quality settings in this menu are disabled (excluding the detail settings). FILE Use to set file-related settings (saving, loading, clearing) of the unit. NETWORK Use to configure network-related settings. DIAGNOSIS Displays the device status. To select a menu from the TOP MENU Turn the control knob to move the , cursor to the desired menu and push the knob. The last accessed page in the selected menu will be displayed. To change page 1 Check that the , cursor is pointing to the page number then push the control knob. The , cursor changes to a flashing ? (question mark). Flashing ?C03 TOP THROUGH MODE: OFF AIR MATCHING: ON HDR LOOK : Live HDR BLACK COMPRESSION: OFF INPUT: 4K 3G(Lv-B) AUTO(2SI) OETF : S-Log3(Live HDR) COLOR : BT.2020 LOOK:Live OUTPUT 4K: 3G(Lv-B) SQD OETF : S-Log3(Live HDR) COLOR : BT.2020 LOOK:Live OUTPUT HD: 3G(Lv-A) --- OETF : SDR COLOR : BT.2020 LOOK:--- 2 Turn the control knob to flip through the pages, and push the knob when the desired page is displayed. The ? (question mark) changes back to ,. Items on the page can now be selected. To set a menu item If ? (question mark) is displayed to the left of the page number, push the control knob to change to the , cursor. Settings on the displayed page can now be modified. 1 Turn the control knob to move the , cursor to the desired item and push the knob. The , cursor changes to a flashing ? (question mark). 2 Turn the control knob to change the setting. To cancel a changed setting Set the CANCEL/ENTER lever to CANCEL before pushing the control knob to restore the original setting. To cancel menu changes Set the DISP/MENU switch to MENU to turn off the menu screen display. The menu setting operation can be restarted by setting the DISP/MENU switch to MENU again. 3 Push the control knob. The ? (question mark) changes back to ,, and the item setting is registered. 4 To change other settings on the same menu page, repeat steps 1 to 3. To set a menu item with multiple input fields Some menus have items with multiple input fields. If you press the control knob when the , cursor is pointing to an item with multiple input fields, the input fields are displayed for setting each input field. The cursor is moved by turning the control knob. 1 Turn the control knob to move the , cursor to the desired item and push the knob. The , cursor changes to a flashing * (asterisk). The input fields and , cursor are displayed. 2 Turn the control knob to move the , cursor to the desired input field and push the knob. The , cursor changes to a flashing ? (question mark). 3 Turn the control knob to change the setting. To cancel a changed setting in an input field Set the CANCEL/ENTER lever to CANCEL before pushing the control knob to restore the original setting of the input field. Other changed input fields for the item are not restored to their previous setting. To cancel menu changes Set the DISP/MENU switch to MENU to turn off the menu screen display. The menu setting operation can be restarted by setting the DISP/MENU switch to MENU again. 4 Push the control knob. The ? (question mark) changes back to ,, and the input field setting changes. 5 Repeat steps 2 to 4 to change other input fields. 6 Turn the control knob to move the , cursor to END and push the knob. The * (asterisk) changes back to ,, and all the changes for the item setting are applied. 20