Sony HDRC-4000 Operation Guide - Page 44

4KtHD Configure settings for down-converting from 4K to HD. Page name Page No. S51 Item DETAIL Set value CH. A: OFF, ON CH. B: OFF, ON HD DETAIL CH. A: OFF, ON CH. B: OFF, ON LEVEL LIMITER CRISP H/V FREQ CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 S52 W.LIMIT B.LIMIT ABS SKIN DTL CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 CH. A: -99 to 99, 0 CH. B: -99 to 99, 0 ENTER to execute OFF, ON SKIN GATE NATURAL SKINDTL CH SW PHASE WIDTH SAT LEVEL Y LIMIT OFF, 1, 2, 3 OFF, ON OFF, ON 0 to 359 0 to 90, 29 -99 to 99, -89 -99 to 99, 0 0 to 99 Meaning Detail (contour emphasis) function on/off setting ((OFF) when input is HD×4) HD output signal detail function on/off setting ((OFF) when the input is HD and ADDITIONAL PAINT is OFF. Also (OFF) when the input is HD×4) Detail level adjustment Detail signal high/low luminance limiter setting Detail level crispening level adjustment (signal amplitude equal to or less than the threshold value is regarded as noise and no detail signal is added) Ratio of horizontal to vertical detail signal strength Frequency response of detail processor bandpass filter The larger the value, the response is at higher spatial frequencies, and the detail signal becomes more fine. The lower the value, the response is at lower spatial frequencies, and the detail signal becomes more coarse. Detail signal high luminance (white) limiter setting Detail signal low luminance (black) limiter setting Highlighted display: ABS (absolute indication) mode Turns the skin detail function on/off for channel A (changes the emphasis of contours of regions of specific color). Enabled only for 4K to HD conversion. Disabled if Detail or HD Detail are set to OFF. Displays zebra in regions where skin detail is applied. (Displayed only for the HD MONI output.) Natural skin detail function on/off setting (prevents skin detail display at edges of color changes, such as eyebrows). Turns skin detail on/off for each channel. Channel 1 is set to ON (fixed). Phase angle of the center of the hue for regions where skin detail is applied. Phase angle width of the hue for regions where skin detail is applied. Lower limit of the saturation for regions where skin detail is applied. Level of contour enhancement for regions where skin detail is applied. Lower limit of the luminance for regions where skin detail is applied. 44