Sony HDRC-4000 Operation Guide - Page 26
Menu List, CONFIGURATION menu
View all Sony HDRC-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Menu List Legend The following conventions are used in the menu tables. Settings ON, OFF, 0, etc.: Factory default settings shown underlined. ENTER to execute: Execute by pushing the control knob or setting the CANCEL/ENTER lever to the ENTER position. CONFIGURATION menu Use to set basic settings of the unit (excludes image quality settings). Page name Page No. C01 Item SYSTEM FORMAT RESOLUTION FREQUENCY FRAME RATE DISPLAY REFERRED CH.A CH.B Set value 3840×2160 1.001, 1.000 59.94, 50, 29.97, 25, 24, 23.98 OFF, ON OFF, ON C02 REFERENCE REF IN, CH.A IN, INTERNAL REF IN STATUS OK, NO SIGNAL, NG(FORMAT UNMATCHED), NG FORMAT CH.A IN STATUS UNKNOWN, NTSC, PAL, 1080/ 59.94i, 1080/50i, 1080/24PsF OK, NO SIGNAL, NG(FORMAT UNMATCHED), NG C03 FORMAT THROUGH MODE UNKNOWN, NTSC, PAL, 1080/ 59.94i, 1080/50i, 1080/24PsF OFF, ON AIR MATCHING OFF, ON Meaning System format settings Resolution setting (display only) Base frequency setting Frame rate setting Display Referred conversion mode on/off setting Display Referred conversion: Conversion that maintains the image visual appearance on a display. When set to ON, image quality adjustments (excluding conversion gain, Knee, Knee Saturation, SDR White Clip) are fixed. Reference sync signal in use (display only) REF IN: Using sync signal input on reference sync signal input connector CH.A IN: Using video signal input on channel A INTERNAL: Using internally-generated sync signal Settings and status of reference sync signal input on reference sync signal input connector (display only) OK: Operating normally NO SIGNAL: No signal is input NG(FORMAT UNMATCHED): Format of the input signal does not match the format of the unit NG: An invalid signal is input due to other reasons Format of reference sync signal input on reference sync signal input connector (display only) Settings and status of reference sync signal input on channel A (display only) OK: Operating normally NO SIGNAL: No signal is input NG(FORMAT UNMATCHED): Format of the input signal does not match the format of the unit NG: An invalid signal is input due to other reasons Format of reference sync signal extracted from video signal input on channel A (display only) Through mode on/off setting. When ON, the input signal on the 4K input connectors of channel A are output as-is on the 4K output connectors. Also, the 4K input connector 1 signal is output on the HD output connector. AIR MATCHING function on/off setting. Conversion so that roughly the same "look" is obtained on a monitor displaying the input HDR signal and a monitor displaying the output HDR signal. 26