Sony HDW1800 Installation Manual - Page 26

Reference System

Get Sony HDW1800 PDF manuals and user guides View all Sony HDW1800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

1-14. Reference System For each reference signal, either of an external reference video signal (*3) or input video signal (*4) is automatically selected according to the setting of function menu item OUT REF, the setting of setup menu ITEM-309, and the operation mode (PB/EDIT/REC) of this unit. (Refer to the table 1-14-1 below.) m . To select the video input, use F1 (VIDEO IN) in the function menu page P01 : HOME. . To set the OUT REF, use F2 (REF VID) in the function menu page P03 : VID PROC. Audio Signal Independent Recording Even if an input video signal is selected as the reference signal, the reference signal is automatically selected to an external reference video signal for the period in which the no input video signal is input. When no external reference video signal is input, the internal-generated reference signal is automatically selected for the period. An audio signal can be independently recorded by this system even if no reference video signal is input from the outside. Alarm Display for Video Input Signal and Reference Signal 1. Blink of the selected input video indication area of the video input selection The selected input video indication area on the system information blinks when signal is not input to the connector selected by the video input selection. 2. Blink of the STOP button The button blinks when the reference signal is not locked to an input video signal. (This function can be canceled in the setup menu ITEM105.) . When the OUT REF is set to "INPUT": The STOP button blinks when the signal is not input to the connector selected by the video input selection. . When the OUT REF is set to "REF": The STOP button blinks in the following either cases. When no reference signal is input to REF. VIDEO connector. When the reference video signal (REF.VIDEO input) is not synchronized with an input video signal selected by the video input selection. Table 1-14-1. Reference System Menu ITEM-309 EXT AUTO OUT REF ----- REF Operation mode ----- PB EDIT (*1) EDIT (*2) REC Video output process Digital audio External Reference Video (*3) Input Video (*4) Servo system *1: When the setup menu ITEM-309 is set to "AUTO1". *2: When the setup menu ITEM-309 is set to "AUTO2". *3: REF. VIDEO input *4: The input video signal is selected by the video input selection. INPUT ----- 1-20 (E) HDW-1800/D1800

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
1-20 (E)
HDW-1800/D1800
Table 1-14-1. Reference System
Menu ITEM-309
EXT
AUTO
OUT REF
—————
REF
INPUT
Operation mode
—————
PB
EDIT
(
*
1)
EDIT
(
*
2)
REC
—————
Video output process
Digital audio
External Reference Video
(
*
3)
Input Video
(
*
4)
Servo system
*
1: When the setup menu ITEM-309 is set to “AUTO1”.
*
2: When the setup menu ITEM-309 is set to “AUTO2”.
*
3: REF. VIDEO input
*
4: The input video signal is selected by the video input selection.
1-14. Reference System
For each reference signal, either of an external reference
video signal (*3) or input video signal (*4) is automatically
selected according to the setting of function menu item
OUT REF, the setting of setup menu ITEM-309, and the
operation mode (PB/EDIT/REC) of this unit. (Refer to the
table 1-14-1 below.)
m
.
To select the video input, use F1 (VIDEO IN) in the
function menu page P01 : HOME.
.
To set the OUT REF, use F2 (REF VID) in the function
menu page P03 : VID PROC.
Audio Signal Independent Recording
Even if an input video signal is selected as the reference
signal, the reference signal is automatically selected to an
external reference video signal for the period in which the
no input video signal is input. When no external reference
video signal is input, the internal-generated reference
signal is automatically selected for the period.
An audio signal can be independently recorded by this
system even if no reference video signal is input from the
outside.
Alarm Display for Video Input Signal and
Reference Signal
1.
Blink of the selected input video indication
area of the video input selection
The selected input video indication area on the system
information blinks when signal is not input to the connec-
tor selected by the video input selection.
2.
Blink of the STOP button
The button blinks when the reference signal is not locked
to an input video signal.
(This function can be canceled in the setup menu ITEM-
105.)
.
When the OUT REF is set to “INPUT”:
The STOP button blinks when the signal is not input to
the connector selected by the video input selection.
.
When the OUT REF is set to “REF”:
The STOP button blinks in the following either cases.
When no reference signal is input to REF. VIDEO
connector.
When the reference video signal (REF.VIDEO input) is
not synchronized with an input video signal selected by
the video input selection.