Sony HT-X9000F Operating Instructions - Page 57
Remote Control, Others, The Control for HDMI function does
View all Sony HT-X9000F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
move this system away from the obstacle. Reposition the connected BLUETOOTH device. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to 5 GHz range. Increase the volume on the connected BLUETOOTH device. Remote Control The remote control of this system does not function. Point the remote control at the remote control sensor on the main unit (page 9). Remove any obstacles in the path between the remote control and the system. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control. TV remote control does not work. This problem might be solved by enabling the IR repeater function (page 27). Others The Control for HDMI function does not work properly. Check the connection with the system (refer to the supplied Startup Guide). Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the system, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the system support the Control for HDMI function. Enable the Control for HDMI function on the devices connected to the system. For details, refer to the operating instructions of your device. The type and number of devices that can be controlled by the Control for HDMI function is restricted by the HDMI CEC standard as follows: - Recording devices (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 devices - Playback devices (Blu-ray Disc player, DVD player, etc.): up to 3 devices (this system uses one of them) - Tuner-related devices: up to 4 devices - Audio system (receiver/ headphones): up to 1 device (used by this system) All the indicators flash quickly and the system is turned off. Disconnect the AC power cord (mains lead) and make sure nothing is obstructing the ventilation holes of the system. Sensors of the TV do not work properly. The main unit may block some sensors (such as the brightness sensor), the remote control receiver of your TV or the emitter for 3D glasses (infrared transmission) of a 3D TV that supports the infrared 3D glass system, or wireless communication. Move the main unit away from the TV within a range that allow those parts to operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions supplied with the TV. 57US