Sony KDL-32M3000 Operating Instructions - Page 12

Preparation for Wall-Mounting This TV can be installed on a wall by using a WallMount Bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV. ~ • Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. Follow the simple steps below to remove the TableTop Stand: 1 Disconnect all the cables from the TV. 2 Gently lay the TV, face down, onto a level and stable surface covered with a thick and soft cloth. Make sure the Table-Top Stand is hanging over the edge. 3 Remove the screws as shown in the illustration for your model and pull the Table-Top Stand out. 4 Do not remove any other screws from the TV. ~ • Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children. • For bracket installation, refer to the Wall-Mount insert (supplied in the accesories) and the instruction guide provided by the Wall-Mount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wallmounting of your TV should be performed by a Sony dealer or licensed contractor. Use the following Sony TV's only with the following WALL-MOUNT BRACKET. Sony TV Model No. KDL-26M3000 KDL-32M3000 KDL-26ML130 KDL-32ML130 KDL-37M3000 Sony Wall-Mount Bracket Model No. SU-WL100 SU-WL500 ~ • Use with other WALL-MOUNT BRACKET may cause instability and possibly result in injury. Model: KDL-26M3000 KDL-26ML130 KDL-32M3000 KDL-32ML130 Remove 3 designated screws only. Model: KDL-37M3000 Remove 4 designated screws only. Level surface covered with a soft cloth 12 Table-Top Stand Level surface covered with a soft cloth Table-Top Stand