Sony KDL-32M3000 Operating Instructions - Page 18

PC Use the TV as a monitor for your PC. Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or HDMI output. (Refer to the supplied Quick Setup Guide.) Rear of TV HD15-HD15 cable (analog RGB) IN PC IN 1 RGB 2 SERVICE ONLY R-AUDIO-L AUDIO VIDEO IN 1 S VIDEO 3 COMPONENT IN (1080i/720p/480p/480i) 1 2 Y DIGITAL AUDIO OUT (COAXIAL) PB VIDEO L (MONO) AUDIO R Audio cable (stereo mini plugs) PR L AUDIO R AUDIO OUT (FIX) ~ • Connect the PC IN jack to the PC using the HD15-HD15 cable with ferrite core (analog RGB) and audio cable (page 15). PC Input Signal Reference Chart After connecting the PC to the TV, set the output signal from the PC according to the chart below. Signals VGA SVGA XGA ~ Resolution Horizontal (Pixel) × 640 × 640 × 640 × 800 × 800 × 800 × 1024 × 1024 × Vertical (Line) 480 480 480 600 600 600 768 768 Horizontal frequency (kHz) 31.5 37.9 37.5 35.2 37.9 46.9 48.4 56.5 Vertical frequency (Hz) 60 73 75 56 60 75 60 70 Standard VGA VESA VESA VESA VESA Guidelines VESA VESA Guidelines VESA • This TV's PC input does not support Sync on Green or Composite Sync. • This TV's PC VGA input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be detected automatically. (PC reboot may be necessary.) 18