Sony KDL-32M3000 Operating Instructions - Page 16

3. Connecting the TV Cable system and/or VHF/UHF Cable or VHF/UHF (or VHF only) 75-ohm coaxial cable (not supplied) Rear of TV VHF/UHF/ CABLE input • It is strongly recommended that you connect the antenna/cable input using a 75-ohm coaxial cable (not supplied) to receive optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio frequency interference, resulting in signal degradation. Cable and VHF/UHF (or VHF only) If you want to watch both cable and antenna (over- the-air) programming, you will need to use an optional A-B RF Switch (not supplied) to switch between the cable and over-the air antenna programming, as shown. Cable A-B RF Switch Rear of TV VHF/UHF/CABLE input Antenna • Be sure to set Cable setting to Cable On or Cable Off in Channel menu for the type of input signal you choose (see page 30 for more details.). HD Cable Box/HD Satellite Box You can also enjoy high definition programming by subscribing to high definition cable service or high definition satellite service. For the best possible picture, connect these components to your TV via the HDMI or component video (with audio) input on the back of your TV. Shown with HDMI Connection Rear of TV IN PC IN 1 RGB 2 SERVICE ONLY R-AUDIO-L AUDIO VIDEO IN 1 S VIDEO 3 COMPONENT IN (1080i/720p/480p/480i) 1 2 Y DIGITAL AUDIO OUT (COAXIAL) PB VIDEO L (MONO) AUDIO R PR L AUDIO R AUDIO OUT (FIX) HDMI cable CATV/Satellite antenna cable HD cable box/ HD satellite box 16