Sony KLV-32U100M Operating Instructions - Page 11

Introducing the Unit Installing the Unit Preventing the Unit from Toppling Over Attaching the Support Belt Introducing the Unit 1 Screw the support belt (supplied) to the unit stand with a wood screw (supplied). 2 Attach the support belt to the stand, and screw the belt with a securing screw (supplied) using a coin, etc. 3 Adjust the length by pulling the support belt towards you while holding the unit stand. Be sure to take measures to prevent the unit from toppling over and causing injury. Depending on the material used for the stand you chose for this unit, the supplied wood screw may not be suitable. Consult your dealer about the type of screw you can use for this unit and your stand. You will need screws that are 3 to 4 mm (1/8 to 3/16 inches) in diameter. When Mounting on a Wall See the Instruction Guide supplied with the wall-mount bracket on how to mount the unit on the wall. 11