Sony KLV-32U100M Operating Instructions - Page 18

Connecting the Unit Satellite Receiver This scenario shows a SAT Box connected through the video inputs. Satellite signals are selected by the SAT Box through the video inputs. z If you connect the Digital Satellite Receiver with component video cables, see page 20. To connect a satellite receiver 1 Connect the satellite antenna cable to the satellite receiver's satellite input jack. 2 Use an A/V and S VIDEO cables to connect the satellite receiver's AUDIO and S VIDEO output jacks to the unit's AUDIO and S VIDEO input jacks (VIDEO 1 or 2). If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. Satellite Receiver Satellite antenna cable S VIDEO cable S VIDEO VIDEO (yellow) A/V cable AUDIO-L (white) AUDIO-R (red) Rear of unit VIDEO IN 1 S VIDEO VIDEO L (MONO) AUDIO R Notes on Using This Connection To Do This ... Watch the satellite receiver Label video inputs to easily identify equipment connected to the unit Do This ... Press V1 or V2 on the remote control. or Press INPUT on the top panel repeatedly to select the satellite receiver input (Video 1 or 2). See the instructions for setting up Label Video Inputs on page 40. 18