Sony LBT-DJ2i Operating Instructions - Page 20
Listening to the radio
UPC - 024272736948
View all Sony LBT-DJ2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Listening to the radio Use buttons on the remote for the operation. 1 Press FUNCTION +/- repeatedly to select FM or AM band. 2 Press TUNING MODE repeatedly until "AUTO" lights up in the display. 3 Press +/-. You can also use TUNE +/- on the unit. Scanning stops automatically when a station is tuned in and "TUNED" lights up in the display. When a FM stereo program is tuned in, "STEREO" lights up in the display. Note If "TUNED" does not light up and scanning does not stop, see "To tune in a station with a weak signal" below. 4 Press VOLUME +/- to adjust the volume. To stop automatic scanning Press x. To tune in a station with a weak signal Use buttons on the remote for the operation. 1 Press TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display. 2 Press +/- repeatedly to tune in the station you want. You can also use TUNE +/- on the unit. To change the AM tuning interval (Except for European model) The factory setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). Use the buttons on the unit for the operation. 1 Press TUNER/BAND repeatedly to select AM band. 2 Press "/1 to turn off the system. 3 When demonstration appears, hold down ENTER on CHANNEL B and then press "/1. The system turn on automatically. "AM 9K STEP" or "AM 10K STEP" appears in the display. When you change the interval, all the AM preset stations are erased. Tip To improve broadcast reception, adjust the supplied antennas, or connect an external antenna. To reduce static noise on a weak FM stereo station Press FM MODE on the remote repeatedly until "MONO" lights up in the display. There will be no stereo effect, but the reception will improve. 20GB