Sony LBT-DJ2i Operating Instructions - Page 49
Specifications - watt
UPC - 024272736948
View all Sony LBT-DJ2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Additional Information Specifications AUDIO POWER SPECIFICATION POWER OUTPUT AND TOTAL HARMONIC DISTORTION: USA model only With 6-ohm loads, both channels driven, from 120 Hz - 10 kHz; rates 90 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 miliwatts to rated output. Amplifier section North American model only The following are measured at AC 120 V, 60 Hz Front speaker RMS output power (reference): 150 W + 150 W (per channel at 6 Ω, 1 kHz, 10% THD) Subwoofer RMS output power (reference): 150 W (at 6 Ω, 100 Hz, 10% THD) Other models The following are measured at Mexican model: AC 127 V, 60 Hz Other models: AC 120, 220, 230 - 240 V, 50/60 Hz Front speaker Power Output (rated): 90 W + 90 W (at 6 Ω, 1 kHz, 1% THD) RMS output power (reference): 150 W + 150 W (per channel at 6 Ω, 1 kHz, 10% THD) Subwoofer RMS output power (reference): 150 W (at 6 Ω, 100 Hz, 10% THD) Inputs LINE IN 1, 2 L/R: Voltage 250 mV, impedance 47 kilohms MIC: Sensitivity 1 mV, impedance 10 kilohms (USB) port: Type A Outputs i : accepts headphones of 8 Ω or more FRONT SPEAKER: accepts impedance of 6 Ω Disc player section System Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6 µW * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response 20 Hz - 20 kHz Signal-to-noise ratio More than 90 dB Dynamic range More than 88 dB Continued l 49GB