Sony LBT-DJ2i Operating Instructions - Page 41
Additional Information, Speakers
UPC - 024272736948
View all Sony LBT-DJ2i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
There is no sound. • Turn VOLUME +/- clockwise (or press VOLUME + repeatedly on the remote). • Check the CROSS FADER slider position (page 31). • Check the speaker connections (page 13). • There is no audio output during Recording Timer. There is no microphone sound. • Turn VOLUME +/- clockwise (or press VOLUME + repeatedly on the remote) or turn MIC LEVEL clockwise to adjust the microphone volume. • Make sure the microphone is connected to the MIC jack correctly. There is severe hum or noise. • A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR. • Move the unit away from the source of noise. • Connect the unit to a different wall outlet. • Install a noise filter (commercially available) to the power cord. • Turn off surrounding electrical equipment. The timer does not function. • Check the timer setting and set the correct time (page 38). • Cancel the Sleep Timer function (page 38). • You cannot select the Play Timer and the Recording Timer at the same time. • Check the CROSS FADER slider position (page 31). The remote does not function. • Remove the obstacles between the remote and the unit. • Move the remote closer to the unit. • Point the remote at the unit's sensor. • Replace the batteries (R6/size AA). • Move the unit away from the fluorescent light. There is no sound output from the headphone. • Turn i LEVEL clockwise to adjust the headphone volume. • Check the headphone connection. • Check that the audio source on the selected channel is played back. There is beat sound even though you have not played back any source. • Press BEAT ON/OFF to turn off beat pattern. There is acoustic feedback. • Reduce the volume. • Move the microphone away from the speakers or change the direction of the microphone. Speakers Sound comes from one channel or unbalanced left and right volume. • Place the speakers as symmetrically as possible. • Check that the speaker are connected securely and correctly. • The source being played back is monaural. There is no sound from the subwoofer. • Adjust the subwoofer level to the appropriate level. • Check that the subwoofer is connected securely and correctly. • Check that the SYSTEM CONTROL jack on the unit is connected. • Check that the power cord on the subwoofer is connected and the power is turned on. Sound lacks bass. • Check that the speaker's + and - terminals are connected correctly. Continued l 41GB Additional Information