Sony MDS-JE470 Operating Instructions - Page 25
Editing Recorded MDs, Before editing, To cancel the last edit, To quit while editing, After editing
View all Sony MDS-JE470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Editing Recorded MDs Editing Recorded MDs Before editing You can edit an MD only when: • The MD is recordable. • The MD play mode is normal play. Note (MDS-JE770 only) When the Group function is on, editing can be performed only for the tracks registered into the selected group. To cancel the last edit Use Undo Function to cancel the last edit and restore the contents of the MD to the condition before the edit. To quit while editing Press MENU/NO or x. After editing Press EJECT A to remove the MD or press ?/1 to turn off the deck. "TOC" or "TOC Writing" starts flashing. The TOC is updated and recording is completed. Before disconnecting the AC power cord MD editing is completed when the MD Table of Contents (TOC) is updated. The TOC is updated when you eject the MD or press ?/1 to turn off the deck. Do not disconnect the AC power cord before updating the TOC (while "TOC" is lit) or while updating the TOC (while "TOC Writing" is flashing) to ensure a complete editing. Erasing recordings - Erase Function The MD deck lets you erase unwanted tracks quickly and easily. The three options for erasing recordings are: • Erasing a single track (Track Erase Function) • Erasing all tracks (All Erase Function) • Erasing a portion of a track (A-B Erase Function) Erasing a single track - Track Erase Function You can erase a track simply by selecting its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. Example: Erasing track 2. Track number 1 Original tracks A 23 B Erase track 2 4 C D 1 2 3 After ERASE A C D 1 While the deck is stopped, playing, or paused, press MENU/NO. "Edit Menu" appears in the display. 2 Turn AMS (or press ./> repeatedly) until "Tr Erase?" appears, then press AMS or YES. The deck starts to play the track indicated by the number in the display. 3 Turn AMS (or press ./> repeatedly) until the track number you want to erase appears. 4 Press AMS or YES. "Complete!" appears. The track following the erased track starts to play. If the erased track is the last one on the MD, the track preceding the erased track starts to play. continued 25