Sony MDS-JE470 Operating Instructions - Page 32
Registering recorded tracks into a new group (MDS-JE770 only)
View all Sony MDS-JE470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Naming a group (MDS-JE770 only) (continued) 5 Turn AMS (or press ./> repeatedly) until "Gp ** (selected group number)" flashes, then press AMS or YES. "Complete!" appears. Note You cannot erase the name of a group that does not have any tracks registered. Registering recorded tracks into a new group (MDS-JE770 only) - Create Function This function allows you to create a new group and register a track or consecutive tracks which are not already registered into that group. You can also create groups without registering any tracks. 1 While the deck is stopped, press GROUP ON/OFF. The GROUP ON/OFF button lights up. 2 Press MENU/NO. "Edit Menu" appears in the display. 3 Turn AMS (or press ./> repeatedly) until "Gp Create?" appears, then press AMS or YES. 4 Do steps 4 to 8 of "Naming a track or an MD using the controls on the deck" on page 29 or steps 2 to 5 of "Naming a track or an MD using the remote" on page 30. 5 Turn AMS (or press ./> repeatedly) to select the first track you want to register, then press AMS or YES. 6 Turn AMS (or press ./> repeatedly) to select the last track you want to register, then press AMS or YES. (When registering only one track, simply press AMS or YES again without performing any other operations.) "Complete!" appears for a few seconds and the tracks are registered into the new group. 32 Tips • To create a group without registering any tracks, turn AMS (or press ./> repeatedly) until "None" appears, then press AMS or YES. "Complete!" appears for a few seconds and new group is created. • You can also register tracks that were recorded on a system that does not support the Group function. Notes • You cannot register the same track to multiple groups. • If all the tracks on an MD are registered into groups, "Assign None" appears after step 4 and you cannot register tracks. • When creating a group without registering any tracks, you must enter the group name. • If you do not enter a group name in step 4, "Group ** (group number)" appears instead of the group name. Releasing group registrations (MDS-JE770 only) - Release Function These functions allow you to release group registrations simply by specifying the group for which you want to release the registrations. In addition, you can also release the group registrations of all tracks on an MD at once. Releasing a single group - Group Release Function You can release the group registrations of all tracks within the specified group and erase that group. (However, note that the tracks are not erased.) 1 While the deck is stopped, press GROUP ON/OFF. The GROUP ON/OFF button lights up. 2 Press GROUP SKIP repeatedly until the group you want to release appears. 3 Press MENU/NO. "Edit Menu" appears in the display. 4 Turn AMS (or press ./> repeatedly) until "Gp Release?" appears.