Sony MDS-JE470 Operating Instructions - Page 33
Releasing the registrations of all tracks on an MD, Changing the recorded level after recording
View all Sony MDS-JE470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
5 Press AMS or YES. "REL Gp ** (selected group number) ??" and the group name appears. 6 Press AMS or YES again. "Complete!" appears. Releasing the registrations of all tracks on an MD - All Release Function You can release the group registrations of all tracks on an MD at once. 1 While the deck is stopped, press GROUP ON/OFF. The GROUP ON/OFF button lights up. 2 Press MENU/NO. "Edit Menu" appears in the display. 3 Turn AMS (or press ./> repeatedly) until "Gp All REL?" appears, then press AMS or YES. "All REL??" appears. 4 Press AMS or YES again. "Complete!" appears. Changing the recorded level after recording - S.F EDIT You can change the volume of recorded tracks using S.F (Scale Factor) Edit. The original track is recorded over at the new recording level. When changing the recording level, you can select Fade-in Recording to gradually increase the signal level at the start of recording, or Fade-out Recording to gradually decrease the signal level at the end of recording. Changing the overall recording level 1 While the deck is stopped, playing, or paused, press MENU/NO. "Edit Menu" appears in the display. 2 Turn AMS (or press ./> repeatedly) until "S.F Edit?" appears, then press AMS or YES. 3 Turn AMS (or press ./> repeatedly) until "Tr Level?" appears, then press AMS or YES. 4 Turn AMS (or press ./> repeatedly) until the track number you want to change the recording level appears, then press AMS or YES. "Level 0dB" appears in the display. 5 MDS-JE770 While monitoring the sound, turn AMS (or press ./> repeatedly) to change the recorded level without turning on the two rightmost indicators on the peak level meters. You can set the level at any value between -12 dB and +12 dB, in 2 dB increments. Avoid turning on these indicators MDS-JE470 While monitoring the sound, turn AMS (or press ./> repeatedly) to change the recorded level without turning on "OVER" on the peak level meters. Avoid turning on these indicators 6 Press AMS or YES. "(S.F) Edit OK?" appears in the display. 7 Press AMS or YES again. The deck starts recording over the existing track. "S.F Edit(:) ** %" appears while the track is being recorded. An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. When the recording finishes, "Complete!" appears. continued 33 Editing Recorded MDs