Sony MDS-JE470 Operating Instructions - Page 41
Assigning characters to keyboard keys, Assigning a character, Clearing key assignments - user
View all Sony MDS-JE470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Operating the MD Deck Using a Keyboard (MDS-JE770 only) Operations while the deck is stopped and a track is selected To Move the track Erase the track1) Combine tracks Press [*] [-] [+] Operations during play To Press Divide the track [/] 1) This lets you erase all tracks while the deck is stopped and no track is selected. Assigning characters to keyboard keys Assigning a character If your keyboard layout does not match the system settings, the display may show the wrong characters or no characters at all when you press the keys. In this case, you need to assign characters to the keys. 1 While the deck is stopped, press [Esc]. 2 Press [F10]/[F11] repeatedly until "Setup?" appears, then press [F12]. 3 Press [F10]/[F11] repeatedly until "Keyboard?" appears, then press [F12]. 4 Press [F10]/[F11] repeatedly until "Assign?" appears, then press [F12]. 5 Press [F10]/[F11] repeatedly until the character you want to assign appears. If the character has already been assigned, "User" appears. If it has not been assigned, "Default" appears. 6 Press [F12]. "" flashes in the display. 7 Press the key to be assigned to on the keyboard. "Key Change" appears, and the selected character is assigned to the key. If "Same Key" appears The same character is already assigned to the key. If "Remove old assign?" appears A different character is already assigned to the key. Press [F12] to clear the current assignment and assign the new character. Press [Esc] to cancel. Notes • You can assign a character using [Shift] only for symbol and number keys. • You cannot assign a character to the following keys: [Esc], [F1] - [F12], [Back Space], [Tab], [Caps Lock], [Enter], [Shift], [Ctrl], [Alt], [Windows], [Space], [Application], [Print Screen], [Scroll Lock], [Pause], [Insert], [Delete], [Home], [End], [Page Up], [Page Down], [Num Lock], [T], [t], [R], [r], and of the numeric keypads) • "Key Change" does not appear in step 7 above if you try to assign a character to one of the keys listed above or other keys for which input is not accepted. Clearing key assignments You can clear key assignments one at a time or all at once. To clear a key assignment 1 Do steps 1 to 4 of "Assigning a character" on page 41. 2 Press [F10]/[F11] repeatedly until the character you want to clear appears, then press [F12]. "" flashes in the display. 3 Press [Delete]. "Key Clear" appears and the key assignment is cleared. To clear all key assignments 1 Do steps 1 to 4 of "Assigning a character" on page 41. 2 Press [Ctrl], [Alt], and [Delete] simultaneously. "All Reset?" appears in the display. 3 Press [F12]. "Complete!" appears, and all assignments are cleared. To cancel the operation Press [Esc]. 41