Sony MDS-JE470 Operating Instructions - Page 30
Naming a track or an MD using the remote, Renaming a track or an MD, Naming a track or an MD continued
View all Sony MDS-JE470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Naming a track or an MD (continued) 7 Repeat steps 4 to 6 to enter the rest of the name. To change a character Press m/M repeatedly until the character to be changed flashes, then repeat steps 4 to 6. To erase a character Press m/M repeatedly until the character to be erased flashes, then press CLEAR. 8 Press YES. The whole name appears in the display, followed by "Complete!". Naming a track or an MD using the remote 1 Press NAME EDIT/SELECT depending on what you want to name: To name Press while A track The MD The track number is displayed The deck is stopped with total number of tracks (or groups when the Group function is on) displayed A flashing cursor appears in the display. 2 Press NAME EDIT/SELECT repeatedly to select the character type. Each time you press the button, the display changes cyclically as follows: "Selected AB(C)" (Upper cases or symbols1)) t "Selected ab(c)" (Lower cases or symbols1)) t "Selected 12(3)" (Numbers) 1) Only can be selected. 3 Enter a character using letter/number buttons. If you have selected upper cases or lower cases 1 Press the corresponding letter/number button repeatedly until the character to be entered flashes. Or, press the button once and press ./> repeatedly. To select symbols, press . repeatedly while "A" is flashing. 2 Press M. The flashing character is entered and lights continuously and the cursor shifts to the right. If you have selected numbers Press the corresponding number button. The number is entered and the cursor shifts to the right. 4 Repeat steps 2 and 3 to enter the rest of the name. To change a character Press m/M repeatedly until the character to be changed flashes, press CLEAR to erase the character, then repeat steps 2 and 3. 5 Press YES. The whole name appears in the display, followed by "Complete!". Renaming a track or an MD 1 Press NAME EDIT/SELECT on the remote depending on what you want to rename: To rename Press while A track The MD The track number is displayed The deck is stopped with total number of tracks (or groups when the Group function is on) displayed A track or disc name appears in the display. 2 Press CLEAR until the selected name is erased completely. 3 Do steps 4 to 7 of "Naming a track or an MD using the controls on the deck" on page 29 or steps 2 to 4 of "Naming a track or an MD using the remote" on page 30. 4 Press YES. The whole name appears in the display, followed by "Complete!". 30