Sony MEX-N4100BT Operating Instructions - Page 18
Using Siri Eyes Free, Settings, Canceling the DEMO Mode, Basic Setting Operation
![]() |
View all Sony MEX-N4100BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using Siri Eyes Free Siri Eyes Free allows you to use an iPhone handsfree by simply speaking into the microphone. This function requires you to connect an iPhone to the unit with BLUETOOTH Auto Pairing. Availability is limited iPhone 4s or later. Make sure that your iPhone is running the latest iOS version. You must complete BLUETOOTH registration and connection configurations for the iPhone with the unit in advance. For details, see "Preparing a BLUETOOTH Device" (page 8). 1 Activate the Siri function on the iPhone. For details, refer to the operating instructions supplied with the iPhone. 2 Press VOICE. The voice command display appears. 3 After the iPhone beeps, speak into the microphone. The iPhone beeps again, then Siri starts responding. To deactivate Siri Eyes Free Press VOICE. Notes The iPhone may not recognize your voice depending on usage conditions. (For example, if you are in a moving car.) Siri may not function properly, or the response time may lag in locations where iPhone signals are difficult to receive. Depending on the iPhone's operating condition, Siri may not function properly, or may quit. If you play a track with an iPhone using the BLUETOOTH audio connection, when the track starts playback via BLUETOOTH, the Siri function automatically quits and the unit switches to the BLUETOOTH audio source. When Siri is activated during audio playback, the unit may switch to the BLUETOOTH audio source even if you do not specify a track to play. When connecting the iPhone to the USB port, Siri may not function properly, or may quit. When connecting the iPhone to the unit, do not activate Siri with the iPhone. Siri may not function properly, or may quit. There is no audio sound while Siri Eyes Free is activated. Settings Canceling the DEMO Mode You can cancel the demonstration display which appears when the source is off and the clock is displayed. 1 Press MENU, rotate the control dial to select [SET DISPLAY], then press it. 2 Rotate the control dial to select [SET DEMO], then press it. 3 Rotate the control dial to select [SET DEMO-OFF], then press it. The setting is complete. 4 Press (back) twice. The display returns to normal reception/play mode. Basic Setting Operation You can set items in the following setup categories: General setup (GENERAL), Sound setup (SOUND), Display setup (DISPLAY), BLUETOOTH setup (BT), SongPal setup (SONGPAL) (Not available when the BT phone is selected.) 1 Press MENU. 2 Rotate the control dial to select the setup category, then press it. The items that can be set differ depending on the source and settings. 3 Rotate the control dial to select the options, then press it. To return to the previous display Press (back). General Setup (GENERAL) CLOCK-ADJ (clock adjust) (page 7) CAUT ALM (caution alarm) Activates the caution alarm: [ON], [OFF] (page 7). (Available only while the source is off and the clock is displayed.) BEEP Activates the beep sound: [ON], [OFF]. 18GB
![](/manual_guide/products/sony-mexn5100bt-operating-instructions-2c1039c/18.png)