Sony MEX-N4100BT Operating Instructions - Page 36

Installation, Removing the protection collar and the, bracket, Mounting the unit in the dashboard

Get Sony MEX-N4100BT PDF manuals and user guides View all Sony MEX-N4100BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Notes on installing the connection cable RC-SR1 (not supplied)  Refer to the support sites on the back cover for details, then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit.  Depending on the type of car, be sure to insulate the unused leads with electrical tape for safety.  Do not connect this cable when the steering wheel remote control is not used.  Consulting the dealer or an experienced technician for help is recommended. When using the wired remote control 1 To enable the wired remote control, set [STR CONTROL] in [SET STEERING] to [EXTERNAL] (page 19). Installation Removing the protection collar and the bracket Before installing the unit, remove the protection collar  and the bracket  from the unit. 1 Pinch both edges of the protection collar , then pull it out. Note for MEX-N4100BT Before installing this unit, remove the screw and box on the back of the unit. Do not use the previous parts you removed when installing the unit. Screw Box Mounting the unit in the dashboard Before installing, make sure the catches on both sides of the bracket  are bent inwards 2 mm (3/32 in). When mounting in a Japanese car, see "Mounting the unit in a Japanese car" (page 37). 1 Position the bracket  inside the dashboard, then bend the claws outward for a tight fit. 182 mm (7 1/4 in) 53 mm (2 1/8 in)  2 Insert both release keys  until they click, and pull down the bracket , then pull up the unit to separate.  Catch  2 Mount the unit onto the bracket , then attach the protection collar .    Face the hook inwards.  Notes  If the catches are straight or bent outwards, the unit will not be installed securely and may spring out.  Make sure the 4 catches on the protection collar  are properly engaged in the slots of the unit. 36GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
36
GB
Notes on installing the connection cable RC-SR1 (not
supplied)
Refer to the support sites on the back cover for
details, then connect each lead properly to the
appropriate leads. Making an improper connection
may damage the unit.
Depending on the type of car, be sure to insulate the
unused leads with electrical tape for safety.
Do not connect this cable when the steering wheel
remote control is not used.
Consulting the dealer or an experienced technician
for help is recommended.
When using the wired remote control
1
To enable the wired remote control, set [STR
CONTROL] in [SET STEERING] to [EXTERNAL]
(page 19).
Installation
Before installing the unit, remove the protection
collar
and the bracket
from the unit.
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys
until they
click, and pull down the bracket
, then
pull up the unit to separate.
Note for MEX-N4100BT
Before installing this unit, remove the screw and box on
the back of the unit. Do not use the previous parts you
removed when installing the unit.
Before installing, make sure the catches on both
sides of the bracket
are bent inwards 2 mm (
3
/
32
in). When mounting in a Japanese car, see
“Mounting the unit in a Japanese car” (page 37).
1
Position the bracket
inside the
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket
, then
attach the protection collar
.
Notes
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
Removing the protection collar and the
bracket
Face the hook inwards.
Mounting the unit in the dashboard
Screw
Box
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Catch