Sony MZ-B10 Operating Instructions (primary manual) - Page 29

Editing recorded tracks You can edit your recordings by adding/ erasing track marks or changing the order of the recorded tracks. Notes • Premastered MDs cannot be edited. • Close the record-protect tab on the side of the MD before editing • When "TOC Edit" is flashing, the editing results are being recorded. -Do not move or jog the recorder. -Do not disconnect the power source. -The lid becomes locked. Adding a track mark You can add track marks so that the part after the new track mark is counted as a new track. A total of 254 track marks can be added on one disc. The track numbers will increase as follows. 1 2 34 Track marking 12345 Track numbers increase TRACK MARK 1 While recording, playing or pausing an MD, press TRACK MARK at the point you want to mark. "MARK ON" appears in the display, and a track mark is added. The track number will increase by one. Erasing a track mark When you erase a regular track mark, the track numbers will change as follows. Example When combining track 2 and track 3 1 2 3 4 Erase a track mark 1 2 3 Track numbers decrease TRACK MARK . • REVIEW • AMS X • PAUSE 1 While playing the track with the track mark you want to erase, press X • PAUSE to pause. To erase the third track mark, play the third track and press X • PAUSE. 2 Find the track mark by pressing . slightly. Find the beginning of the third track. "00:00" appears in the display. "MARK" appears in the display for 2 seconds. 3 Press TRACK MARK to erase the mark. "MARK OFF" appears in the display. The track mark is erased and the two tracks are combined. z When you erase a track mark, the settings assigned to the mark are also erased. 29