Sony MZ-B10 Operating Instructions (primary manual) - Page 54
Insert an MD
View all Sony MZ-B10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Error message NO COPY NO DISC NO EDIT NO SET NoOPERATE NO SIGNAL P/B ONLY PROTECTED READ ERR REC ERR Meaning/Remedy • You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection. , Use analog connection instead (page 22). • You tried to play or record with no disc in the recorder. , Insert an MD. • You tried to erase a group with a disc without group setting. , You cannot erase groups with a disc with no groups. • You selected " : Set", " : Release", or "Move" while recording. • You tried to erase a track, disc, or group while recording. • You tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in stereo and in mono, for example). • You tried to overwrite a track marks. • You tried to make the following settings while recording. - Recording mode - Selection of " : REC" in menu - Play mode while "End" appears in the display • You tried to make the Auto Time Mark setting while recording through digital connection. • You tried to press X • PAUSE or TRACK MARK during synchrorecording. • The recorder could not detect digital input signals. , Make sure that the source is connected firmly (page 21). • You tried to record or edit on a premastered MD (P/B stands for "playback"). , Insert a recordable MD. • You tried to record or edit on a MD with the tab in the recordprotect position (page 46). , Slide the tab back. • The recorder cannot read the disc information correctly. , Reinsert the disc. • Recording was not correctly done. , Place the recorder at a place with no vibrations and record again. • The disc is soiled with an oil film or finger prints, is scratched, or is not a standard disc. , Try recording again with another disc. 54