Home » Sony Manuals » Voice Recorders » Sony MZ-B10 » Manual Viewer

Sony MZ-B10 Operating Instructions (primary manual) - Page 8

Checking the supplied accessories, filter as shown below. - used

Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Checking the supplied accessories Headphones/earphones (1) Carrying pouch (1) Handstrap (1) Clamp filter for the AC power adaptor (1) Attach the clamp filter when using the optional AC power adaptor. LR6 (size AA) alkaline dry batteries (2) (World model only) When using the optional AC power adaptor Before using the AC power adaptor, do the following procedure to attach the clamp filter to the cord of the AC power adaptor. (You must affix the ferrite cores to comply with applicable EMC standards.) 1 Open the clamp filter. 2 Wind the AC power cord into the clamp filter as shown below. Maximum length: approx. 4 cm (15/8 inches) 3 Close the clamp filter. Make sure the clasps are fully engaged. 8

Section	Page
Looking at the controls	9
Preparing a power source	12
Recording an MD right away!	13
Playing an MD right away!	16
Various ways of recording	18
Long-time recording (MDLP)	18
Recording from a stereo microphone	19
Recording from externally connected equipment	20
Recording with digital (optical) input (Digital Recording)	21
Recording from a TV or radio (Analog Recording)	22
To start/stop recording in sync with the sound source (Synchrorecording)	23
Adding track marks while recording	24
Adding track marks manually	24
Adding track marks automatically (Auto Time Stamp)	24
Various ways of playback	26
Changing the sound mode	26
Changing playback speed (Speed Control)	26
Selecting the play mode (Single Play/ Repeat Play)	27
Editing recorded tracks	29
Adding a track mark	29
Erasing a track mark	29
Moving recorded tracks (Move)	30
Erasing tracks (Erase)	31
To erase a track	31
To erase the whole disc	31
Using the group function	32
Using the group function	32
Using the group function when recording	32
Recording tracks to a new group	32
Recording a track to an existing group	33
Using the group function when playing	33
Playing a track in group play	33
Editing groups	34
Assigning tracks or groups as a new group (Group Setting)	34
To release a group setting	35
Moving a track in a disc with group setting	35
Changing the order of a group on a disc (Group Move)	36
To erase a group	37
Other operations	38
Useful settings	38
How to use the menu items	38
Creating a new group when recording	39
To select microphone sensitivity	39
Starting an operation quickly (Quick Mode)	40
Using an optional foot control unit	40
List of menus	41
Power sources	42
When to replace the batteries	42
Battery life	42
Using house current	43
Additional information	44
Precautions	44
Specifications	47
Troubleshooting and explanations	48
Troubleshooting	48
While recording	48
While playing	50
While Editing	51
While using group function	52
Others	52
Messages	53