Sony NW-WS413 Help Guide Printable PDF - Page 98
Help Guide | Formatting memory, Press the Previous/Next button
View all Sony NW-WS413 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Help Guide How to Use Digital Music Player NW-WS413/WS414 Formatting memory You can initialize your Walkman by formatting the memory. 1. Check that the playback is paused. 2. Press and hold the button ( ) on the right ( ) side of your Walkman for about 17 seconds until the lamp ( ) on the right ( ) side of your Walkman blinks in orange quickly. 3. Release the button ( ). The lamp ( ) lights up in red. 4. Press the Previous/Next button ( ) on the right ( ) side of your Walkman within 30 seconds after the lamp ( ) lights up in red. 5. Press the button ( ) while the lamp ( ) is lit in green. The lamp ( ) blinks in green quickly while formatting. The lamp ( ) turns off when formatting is completed. Note Be sure not to initialize (format) the memory of your Walkman using a computer. If you have formatted it with a computer, format it again using the Walkman. Formatting the memory erases all content data (songs, etc., including the sample data installed at the factory, and the supplied software installer). Be sure to check the data stored in the memory and export any important data to your computer before formatting. Related Topic Confirming the Walkman status by the OPR lamp 91