Sony PRS600RC User's Guide - Page 158
Connection to the computer, to On, set it to Off. If the Reader is
UPC - 027242771871
View all Sony PRS600RC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Troubleshooting Connection to the computer Symptom The Reader cannot be operated during USB connection. The Reader cannot be recognized. Cause or corrective action Disconnect the USB cord from the Reader, and reset it, then reconnect the USB cord. The Reader is locked. The Reader is turned off or the USB cable is not connected properly. Verify the above and try again. A USB hub or USB extension cable is used for the connection. Connection via an extension cable or USB hub is not guaranteed. Connect the USB cable directly to the computer. Verify that (indicating connection via USB) is displayed at the top of the Reader's screen. If the Reader still cannot be recognized, disconnect the USB cable from the Reader, then reconnect it after a while. If "Device Lock" of the Reader is set to "On," set it to "Off." If the Reader is locked, it will not be recognized by your computer. While the Reader is connected to a computer, do not turn on, restart, wake up from sleep mode, or shut down the computer. These operations may render the Reader unrecognizable by the computer. Disconnect the Reader from the computer before performing these operations. Continued 158