Sony STR-DN1070 Operating Instructions - Page 16
Connecting Speakers, Speaker configuration and speaker pattern settings
View all Sony STR-DN1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Speaker configuration and speaker pattern settings Select the speaker pattern according to the speaker configuration which you are using. Speaker configuration in each zone Main zone Zone 2* Zone 3 5.1-channel Not used 7.1-channel using surround back speakers Not used 7.1-channel Not used using front high speakers 5.1-channel with 2-channel Zone 2 speakers 3.1-channel with Zone 2 and Zone 3 connections 2-channel 5.1-channel with Not used Bi-Amplifier connection 5.1-channel with Not used Front B speakers Not used Not used Not used Not used 2-channel Not used Not used [Surround Back Speaker Assign]** [Surround Speaker Assign] Speaker pattern to be selected in [Speaker Settings] For connection, see page [Off] [Off] [5.1] 17 [Off] [Off] [7.1] 18 [Off] [Off] [7.1 (FH)] 19 [Off] [Off] [5.1] 20 [Off] [Zone3] [3.1] 21 [Bi-Amp] [Off] [5.1] 22 [Front B] [Off] [5.1] 23 * You can only enable the SPEAKERS ZONE 2 terminals if you set [SURROUND BACK/ZONE2 Priority] in [Speaker Settings] to [ZONE2 Terminals], and turn on the ZONE 2 power. ** You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and front high speakers. Connecting Speakers This receiver allows you to connect up to 7.1-channel system. The speaker layout diagram is a guide for the ideal speaker placement. You do not need to adjust your speaker placement exactly the same as the diagram. Note Before connecting cables, be sure to disconnect the AC power cord (mains lead). Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cables are not touching each other between the SPEAKERS terminals. When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output. If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks. 16GB