Sony STR-DN1070 Operating Instructions - Page 34

Note  Audio playback on a server may occasionally be interrupted if you use a wireless connection.  When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance. Note After you turn off the receiver, "STANDBY" flashes on the display panel. Do not disconnect the AC power cord (mains lead) while "STANDBY" is flashing. This may cause a malfunction. Connecting the AC Power Cord (mains lead) Before connecting the AC power cord (mains lead), be sure to make connections for speakers and the other devices. 1 Connect the AC power cord (mains lead) to a wall outlet. Setting up the Receiver using the Easy Setup To perform initial setup of the receiver, make sure a TV is connected to the receiver (page 24). Then, switch the input of the TV to the input to which the receiver is connected. Note It is not possible to perform the Easy Setup procedure using the indications on the front display panel. When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears on the TV screen. Follow the on-screen instructions to make the basic settings using / / / and . To the wall outlet 2 Press  (power) to turn on the receiver.  You can also turn on the receiver using  (power) on the remote control. To turn off the receiver, press  (power) again. Easy Setup Welcome! Select your language. English Español Français Deutsch : Choose : Go back : Continue : Apply the selection If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by pressing HOME, then select [Setup] - [Easy Setup]. Setup Easy Setup Restarts Easy Setup to configure basic settings. Follow the on-screen instructions. Speaker Settings Audio Settings Screen Settings HDMI Settings Input Settings Network Settings Bluetooth Settings Select BACK Back 34GB