Sony STR-DN1080 Operating Instructions - Page 42
Listening/Watching, Enjoying Sound and Video, Playing AV devices/Listening to, FM radio
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Listening/Watching Enjoying Sound and Video Playing AV devices/Listening to FM radio You can connect AV devices to the receiver to enjoy a wide range of content such as movies and audio. Also, you can listen to FM broadcasts in highquality sound through the built-in tuner. 1 Turn on the device you want to play. 2 Turn on the receiver. 3 Turn the TV on, and then switch the input of the TV to the input to which the receiver is connected. 4 Press HOME. The home menu is displayed on the TV screen. Depending on the TV, the home menu may take some time to appear on the TV screen. Watch Listen Custom Preset Sound E ff e c t s Zone Controls Setup Watch Select the video source connected to the receiver. 5 Press / to select [Watch] or [Listen], then press . The menu item list appears on the TV screen. 6 Select the device you want to play and start playback. When you select [FM TUNER], tune in to your desired station by using the buttons on the remote control according to the guide on the TV screen. For details on operation, visit the Help Guide. 7 Press +/- to adjust the volume. You can also use MASTER VOLUME on the receiver. Note Before you turn off the receiver, be sure to turn down the volume level to avoid damaging your speakers the next time you turn on the receiver. Tip You can turn INPUT SELECTOR on the receiver or press the input buttons on the remote control to select the device you want. To turn the volume up or down quickly TPurernssthaendMhAoSldTEoRnVeOoLfUthMeE kno+b/q- ubiuckttloy.ns. To make fine adjustments TPurernssthoeneMoAfStThEeRVOL+U/-MbEuktntoonbssalonwdlrye.lease it immediately. Setting HDMI signal format You can select a HDMI signal format according to video signals from devices connected to the HDMI IN jacks. 1 Press HOME, then select [Setup] - [HDMI Settings] - [HDMI Signal Format]. 2 Select the format you want. [Standard format]: Selects this when you do not use high bandwidth video format. [Enhanced format]: Selects this when you use high bandwidth video formats such as 4K/60p 4:4:4, 4:2:2 and 4K/ 60p 4:2:0 10 bit. Note For details on the high bandwidth video format, visit the Help Guide. 42GB