Sony STR-DN1080 Operating Instructions - Page 56
Network connection, Set [Control for HDMI] to [On] in the [HDMI
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Check that headphones are not connected to the receiver. Press (muting) to cancel the muting function. Try pressing the input button on the remote control or turning INPUT SELECTOR on the receiver to select the input to which you want to listen. If you want to listen to sound from the TV speaker, set [Audio Out] to [TV + AMP] in the [HDMI Settings] menu. If you cannot play multi-channel audio source, set [AMP]. However, the sound will not be output through the TV speaker. Sound may be interrupted when the sampling frequency, number of channels or audio format of audio output signals from the playback device is switched. If you are listening with BLUETOOTH headphones, check that the [Bluetooth Mode] is set to [Transmitter]. Sound for the center channel is not output if you set the speaker pattern to a setting that does not have a center speaker or when [DSD Native] is set to [On] and a DSD multi-channel source is being played back. Sound for surround left/right channels is not output if you set the speaker pattern to a setting that does not have surround speakers or when [DSD Native] is set to [On] and a DSD multi-channel source is being played back. No sound from [USB], [Bluetooth] (only when [Bluetooth Mode] is set to [Receiver]), [Home Network], and [Music Service List] is output to the Zone 2 speakers if you set [DSD Native] in [Audio Settings] to [On]. When a TV is connected to the receiver via an HDMI OUT A (TV) jack that supports the Audio Return Channel (ARC) function, sound from the TV is not output from the speakers connected to the receiver. Set [Control for HDMI] to [On] in the [HDMI Settings] menu. Make sure that your TV is compatible with the Audio Return Channel function. Make sure that the HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. Set the Audio Return Channel (ARC) function of your TV to on. The surround effect cannot be obtained. Be sure to select the optimal sound field for the content. For details on the sound fields, see "Selectable sound fields and their effects" (page 49). [Dolby Surround] and [Neural:X] do not work when the speaker pattern is set to [2.0] or [2.1]. The sound lags behind the picture. When the Wireless Multi-Room function is activated, the sound may be delayed. Network connection Cannot connect to the network using WPS via a wireless LAN connection. You cannot connect to a network using [Wi-Fi Protected SetupTM (WPS)] if your access point is set to WEP. Set up your network after searching the access point using the access point scan. Cannot connect to the network. Check that the LAN cable is connected to the receiver when you want to connect the receiver to the network via a wired LAN connection. Check the network information. If the connection failed, set up the network connection again. If the receiver is connected through a wireless network, move the receiver and the wireless LAN router/access point closer to each other and perform the setup again. Make sure that you use a wireless LAN router/access point. Make sure that the wireless LAN router/ access point is turned on. Check the settings of the wireless LAN router/access point and perform the setup again. For details on the settings of devices, refer to the operating instructions of the devices. Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the receiver away from these devices. 56GB